Shenzhen GLGNET Electronics Co., LTD
Shenzhen GLGNET Electronics Co., LTD
Add to Cart
GLGNET SFP Solutions 0.25 Mm SFP Cage 1 x 6 Stacked 1 Piece Stamped Formed Metal
SFP+ pluggable cage designed to support data rates of 10 Gb/s. These SFP+ pluggable cages have a one degree mounting angle to meet the requirements of SFF-8075 for PCI card applications and support belly-to-belly mount applications. The cages feature external EMI springs that provide EMI containment at the panel opening and a module locking latch for holding the mating module in place.
A series of SFP+ ganged receptacle cage assemblies without integrated connectors supplied by GLGNET. The SFP small form –factor pluggable plus range of products are designed for applications in the networking, telecommunication and data centre industries. The next generation of high-speed I/O devices, supporting 10 Gbit/s Ethernet InfiniBand enhanced data rate requirements. The Press Fit copper alloy cages offer EMI spring or EMI gasket variants and are fully backward compatible with existing SFP+ optical modules and cable assemblies.
GLGNET has Variety SFP Cage Products:
GLGNET supports SFP cage + SFP connector total solution; That SFP Cages can be combined with integrated interface connector together, you only need to insert the SFP Transceiver with Fiber Cable assembly.
In addition, GLGNET support to custom different SFP+ cage, our Customization service as following :
1. GLGNET SFP+ Cage ( 47037-00N011 ) Structure:
| Product Description |
1 x 6 Stacked SFP+ Cage with EMI Finger Spring Press Fit Mount Type , without Integrated Interface |
| SFP plus Cage Length | 48.7 mm |
| SFP plus Cage Width | 85.95 mm |
| SFP plus Cage Height | 9.75 mm |
| SFP plus Cage Press Fit Pin Length | 2.05 mm |
| SFP plus Cage Single Port Width | 14.0 mm |
| SFP plus Cage Single Port Height | 8.95 mm |
| Appearance | one piece Stampled and Formed Metal Cage, with heat dissipation hole |
| Light Pipes | Without, can ce customized as required |
| Heat Sink | Without, can ce customized as required |
| Monut Type | Press Fit Mount Type |
| Cage Materials | Copper Alloy 0.25 mm thickness |
| EMI Gasket | Without |
| EMI Tab Spring | With, provide better EMI protection |
| CLIP Material | Stainless steel |
2. GLGNET SFP+ Cage ( 47037-00N011 ) Product Benefit:
| Item | Benefits |
| MT design packaged in tape and reel | Ensures easy pick-and-place to the PCB |
| Single port cages available in press-fit, solder-post and PCI (1°) versions; ganged cages available in press-fit version | Enables use with various board thicknesses and assembly processes |
| Press-fit tails accommodates belly-to-belly applications for single and ganged cages | Ensures best use of PCB real estate |
| Modules oriented "belly-to-belly" when inserted | Ease of removal of the module from the port |
| Integrated light pipes for use with SMT Light Emitting Diode's (LED's) | Provides port status and activity feedback to the user |
| Unique thumb latch | Provides intuitive squeeze and pull-latching mechanism |
| Hot-pluggable transceivers | Allow insertion and removable of plug without powering down the system |
| Press-fit termination to PCB | Eliminates soldering, lowering the applied cost and avoiding solder-related issues |
| Ganged cages have 360° elastomeric gaskets, spring fingers and multiple ground-pin locations | Provides advanced EMI shielding to the bezel |
| Elastomeric or metal gasket | Two options for superior EMI protection |
| Zinc diecast backshells | Provide 360° Electro Magnetic Interference (EMI) shielding |
3. GLGNET SFP+ Cage ( 47037-00N011 ) Applications:
4. GLGNET Advantages:
5. Mechnical Drawing
You can know the Demensions Details from Following Drawing
