Shenzhen GLGNET Electronics Co., LTD
Shenzhen GLGNET Electronics Co., LTD
Add to Cart
4 Ports Ganged SFP+ Shield Cage Assembly with EMI Spring Press fit Mounting
1. 47016-01N011 1x4 SFP+ Shield Cage Overview
| GLGNET P/N | 47016-01N011 |
| Description | 1x4 SFP+ Cage Assembly No Light Pipe No Heat Sink |
| Port Configuration | Ganged 4 ports |
| EMI Spring | Yes |
| Light Pipe | No |
| Heat Sink | No |
| Cage Body Depth (mm) | 48.7 |
| Cage Body Height (mm) | 9.65 |
| Cage Body Width (mm) | 57.45 |
| Pin Length (mm) | 2.05 TYP |
| Mounting Type | Press Fit |
| Total Height (mm) | 9.65 |
| Shield Material | 0.25mm thickness coppy alloy |
| EMI Spring Material | 0.1mm thickness coppy alloy |
| Clip Material | NA |
| Heat sink Material | NA |
| Light Pipe Material | NA |
| Light Pipe Material | NA |
| Surface Plating | Nickel Plating |
| Recommended PCB Thickness | 1.5MM MIN |
| Rated Current | 0.5 A Max @ 30℃ |
| Operating Temperature | -40 to +85 ℃ |
| Storage Temperature | -40 to +85 ℃ |
| RoHS Compliant | Yes |
2. 47016-01N011 1x4 SFP+ Shield Cage Mechanical Requirement
| ITEM | Qualtified Result | Test Condition |
| Durability | No damaged. | Speed:25mm / minute Cycles:250 Cycles |
| Cage retention(Latch strength of cage) | 110N Min. | Speed:25mm / minute |
| Cage press-fit insertion force | 1x1 CAGE: 500N Max. 1x2 CAGE: 600N Max. 1x4 CAGE: 1300N Max. 1x6 CAGE: 1330N Max. | Speed:100mm / minute |
| Cage press-fit extraction force | 1x1 CAGE: 60N Min. 1x2 CAGE: 60N Min. 1x4 CAGE: 80N Min. 1x6 CAGE: 100N Min. | Speed:100mm / minute |
3. 47016-01N011 1x4 SFP+ Shield Cage Environmental Requirement
| ITEM | Qualtified Result | Test Condition |
| Solder ability (Special applied for DIP Cage) | Contact Soldering area: 95% Min. | Temperature:245±5℃ Duration: 5±1sec |
| Resistance to Wave Soldering Heat (Special applied for DIP Cage) | No damaged | Temperature:260±5℃ Duration: 5±1sec. |
| Heat Test | No damaged | Temperature:115±5℃ Duration:250H |
| Salt Spray | No damaged | Duration:48H |
4. GLGNET SFP+ Cage FEATURES AND BENEFITS
| 1. Available in single port, ganged and stacked configurations | |||||||||
| 2. Cages in multiple configurations, offering either elastomeric gasket or EMI springs to address EMI containment at higher data rates. | |||||||||
| 3. Belly to belly mounting cages are also available allowing for design and retrofitting flexibility | |||||||||
| 4. SFP+ connectors are designed to support up to 16 Gbps signal speeds and are backward compatible with SFP. | |||||||||
| 5. Available with heat sink and light pipe options for visual verification of operability and the ability to dissipate heat then allow for increased performance and longer transceiver lifecycle | |||||||||
| 6. Pair with 20pin SMT Connector,Compatible with SFP+ Optical Transceiver, supports applications up to 16 Gb/s | |||||||||
| 7. Uses enhanced 20-position connector that is backward-compatible with SFP connectors |
5. GLGNET SFP+ Cage Application
Applications by Protocol
6. GLGNET Advantage
7. 47016-01N011 1x4 SFP+ Shield Cage Mechnical Drawing
8. Paired 20pin SFP+ Connector Mechnical Drawing (47030-00J191)